Lab or R&D unit which offers a flexible lab system with a choice of 3 modes of operation all based around the 50 ATP classifier.

Designed to provide a comprehensive multi-purpose lab milling system. Mill internals are quick and easy to remove for cleaning or to exchange for alternative grinding media. Mill can be supplied as a custom system from simple hand fed unit to fully automatic enclosed system in 10 bar PSR design.

Simple compact mill system based on Hosokawa's classifier mill technology. Provides extremely fine powders with tight control of particle size distribution and top size or cut point. Useful for preparation of uniform small batches for sampling or testing. Can be used for continuous production. Allows direct scale-up of operating parameters for production ACM's.

This type of mill operates on the principle of impact grinding and employs high rotor speeds with a striking edge velocity of up to 120 m/s. Size reduction takes place by the impact of material particles on the rotating grinding surfaces (hammers or pins) and on the fixed liner, or grinding track. Designed with an integral classifier, particle size, distribution and cut point can be accurately controlled by variable classifier speed.

Impact mill with integral high efficiency classifier. Universally applicable for almost all products up to a hardness of approximately 3 Moh's. Machine sizes ranging from 1.1 to 200 kW with a variety of classifier configurations. Unit can be easily opened to facilitate cleaning, inspection and maintenance. Can be supplied in 10 bar pressure shock resistant design.

World famous particle size measuring device used for particle size distribution determination. Samples of around 10 grammes are fluidised by a revolving jet stream producing very accurate separation. Fine particles are sucked through the test screens, available from 10 microns to 2 mm.

Continuous wet or dry pulverising / grinding / homogenising and mixing of chemicals, foodstuffs and pharmaceutical products. Crevice free hygienic construction as standard. Easy opening for fast cleaning & product changeover. Secondary discharge design available for continuous ejection of non friable materials. Compact design / small footprint. Direct or indirect drive versions available.

Lab size spiral jet mill for ultrafine products micronising micro batches with minimum loss. Compact monobloc design. Surface finish Ra = 0.8 µm. No threads in product contact zone. Components weigh below 10 kg and can be sterilised in an autoclave.

Designed for continuous dry grinding of dry, hard material size reduction. Ultrafine milling of minerals, working in conjunction with ATP classifier. Iron and discolouration-free processing is possible.

Full bore passage valve with no static pockets. Easy to clean. Suitable for both pressure and vacuum service. Sizes ranging from 125 to 400 mm. Operating pressure up to 8 bar. Pressure shock resistant to 10 bar. Shaft sealings can be quickly assembled and dismantled.